Ranger Parts Wash Cabinets Parts Washers From JB McNeill Garage Equipment Northern & Southern Ireland

BETTER BY DESIGN FROM RANGER

Ranger Parts Wash Cabinets, sometimes called spray-wash cabinets, are of top quality construction and second to none on the market. The two models featured below are our best selling models for parts washing of cars, vans and trucks. Both have many features as standard, the larger capacity of the Ranger RS-750 parts washer being well suited to truck repair centres.

Specifications & Description
Manufacturer: Ranger Products
• Overall Height: 66" / 165 mm.
• Inside Height: 43" / 188 mm.
• Inside Width: 32" / 80 mm.
• Turntable Diameter: 30" / 75 mm.
• Recommended Floor Space: 44" x 43" / 110 mm x 108 mm.
• Load Capacity: 500 lbs. / 227 Kgs..
• Cycle Timer: 0-60 minutes.
• Stainless-Steel Nozzles: 18.
• Cabinet / Door Construction: Steel / 12 Gauge / .109 Thickness.
• Pump Output: 75 psi @ 70 gpm.
• Motor: 1-HP / 220 Volt AC / 60 Hz / 1 Phase.
• Electric Heater: 6 Kilowatts.
• Water Temperature: 0° - 190° Fahrenheit.
• Large Drain Pipe: Standard.
• Heavy-Duty Rubber Casters: Standard.
• Tank Capacity: 50 Gallons.
• Removable Tank Screen: Standard.
• Stainless Oil Skimmer: Standard.
• Friction-Drive Turntable: System Standard.
• Full Opening Octagonal Door: Standard.
• Gasket-Free Door: Standard.
• Small Parts Basket: Standard.
• Steam Vent: Optional.
• Stainless-Steel Handles: Standard.
• Removable Parts Tree: Standard.
• 25 pounds Detergen:t Standard.
• Shipping Weight: 740 lbs. / 336 Kg..

An increased cabinet size and larger solution tank makes the RS-500 Parts Washer more versatile and productive. By using an octagonal full-opening door, we've increased access to the turntable allowing operators enhanced loading capabilities. Simple operating controls stainless-steel nozzles, a gasket-free door and a large 70-gpm pump, demonstrate Ranger's commitment to enhance performance and productivity. Like all Ranger spray-wash cabinets, the RS-500 is built to last. We purposely constructed the cabinet and door with heavy-duty 12-gauge steel, then we coated it with an industrial two-step primer and polyurethane finish. All-around performance, durability and improved operator convenience helps make the RS-500 the definitive choice among professionals worldwide for a Parts Wash Cabinet.

Specifications & Description
Manufacturer: Ranger Products
• Overall Height: 78" / 195 mm.
• Inside Height: 54" / 135 mm.
• Inside Width: 32" / 80 mm.
• Turntable Diameter: 30" / 75 mm.
• Recommended Floor Space: 44" x 43" / 110 mm x 108 mm.
• Load Capacity: 1000 lbs. / 227 Kgs..
• Cycle Timer: 0-60 minutes.
• Stainless-Steel Nozzles: 22.
• Cabinet / Door Construction: Steel / 12 Gauge / .109 Thickness.
• Pump Output: 70 psi @ 70 gpm.
• Motor: 2-HP / 220 Volt AC / 60 Hz / 1 Phase.
• Electric Heater: 6 Kilowatts.
• Water Temperature: 0° - 190° Fahrenheit.
• Large Drain Pipe: Standard.
• Heavy-Duty Rubber Casters: Standard.
• Tank Capacity: 53 Gallons.
• Removable Tank Screen: Standard.
• Stainless Oil Skimmer: Standard.
• Friction-Drive Turntable: System Standard.
• Full Opening Octagonal Door: Standard.
• Gasket-Free Door: Standard.
• Small Parts Basket: Standard.
• Steam Vent: Optional.
• Stainless-Steel Handles: Standard.
• Removable Parts Tree: Standard.
• 25 pounds Detergen:t Standard.
• Shipping Weight: 960 lbs. / 435 Kg..

For more information and expert friendly advice about our parts wash cabinets, or for a product brochure, please contact us on the telephone number below. Alternatively, see our contact page to send us an e-mail.